The heat conducting oil electric heater of reaction kettle is a new type, safe, efficient and energy-saving furnace with low pressure (under normal pressure or lower pressure) and can provide high-temperature heat energy. It is a kind of special industrial furnace with electricity as heat source, heat transfer oil as heat carrier and circulating oil pump for forced liquid-phase circulation to transfer heat energy.
The heat conducting oil electric heater of reaction kettle is a new type, safe, efficient and energy-saving furnace with low pressure (under normal pressure or lower pressure) and can provide high-temperature heat energy. It is a kind of special industrial furnace with electricity as heat source, heat transfer oil as heat carrier, and forced liquid-phase circulation by circulating oil pump. The heat energy is transferred to the thermal equipment and then returned to the reheated DC special industrial furnace, so it goes on and on It can realize the continuous heat transfer, increase the temperature of the object to be heated and meet the process requirements of heating.
On September 19, 2019, ouneng machinery, a professional manufacturer of mold temperature machine, oil heater and electric heating heat conduction oil furnace, is a high-tech enterprise focusing on the research and development of mold temperature machine, oil temperature machine, die-casting mold temperature machine, electric heating heat-conducting oil furnace and industrial water chiller, which has obtained the professional qualification of "special equipment manufacturing license". All the heat conducting oil heaters of reaction kettle are directly inserted into organic carrier (heat transfer oil) for direct heating, and forced liquid-phase circulation is carried out by high-temperature oil pump, and the heated heat-transfer oil is transported to the heating equipment, and then the oil outlet of the thermal equipment returns to the hot oil furnace for heating, forming a complete circulating heating system.
The heat conducting oil heater of reaction kettle is produced and transmitted by the electric heating element immersed in the heat transfer oil. Taking the heat transfer oil as the medium, the circulating pump is used to force the heat transfer oil to carry out the liquid-phase circulation and transfer the heat to one or more heat using equipment. After the thermal equipment is unloaded, it goes back to the heater through the circulating pump again, and then absorbs the heat and transfers it to the heating equipment, It can realize the continuous heat transfer, increase the temperature of the object to be heated, and meet the technological requirements of heating
The main characteristics of heat transfer oil heating reactor are uniform temperature and higher controllability. When the heat transfer oil heater directly heats the reactor through the heat conducting oil in the jacket, the heat transfer oil is in the flow state and the heating is uniform, which will not cause the local temperature to be too high. Moreover, the heat-conducting oil heater controls the temperature of the heat-conducting oil. By adjusting the heating state through the PID system, the temperature control accuracy is relatively high, which can reach ± 0.5 ℃. Reminder: high power heat transfer oil heater belongs to special equipment, and qualified manufacturers should be selected as far as possible. |
