Purchase tips: 1, this product is suitable for office areas, shops, hotels, hotels, banks and other commercial places with decorative hangings. After installation, the lower panel of the machine is flush with the decoration shed. 2. According to the suspension height, it can be divided into three series: a series 3M, B series 5m, C series 7m, and a series noise. It is divided into hot water type and steam type. 3. The hot water type adopts copper tube with aluminum foil, and the air conditioning system plate is used after 60 ℃ hot water; the steam type adopts steel tube aluminum fin heat exchanger, using steam below 0.4MPa. 4. The centrifugal fan is adopted, the return air is integrated, and the high temperature air under the suction shed is used as the return air, with high thermal efficiency. There is no need to control, additional configuration control box use or optional remote control function.
The water heater uses hot water as the heat medium, and is connected by the upper and lower joints on the same side. The air heater adopts multi fluid form, so that the structure is compact and the heat exchange is sufficient. It is used to heat the hot air of factories, mines, production workshops and other large buildings. The utility model has the advantages of simple structure, convenient installation and low energy consumption. After the thermal performance test, the performance is stable and reliable. The difference between the water heater and the electric heater is literally, one is to use hot water heating equipment, the other is to use electric heating equipment. Water heater is a kind of building heating equipment, which takes hot water as heat medium, ranging from 80 ° C to 132 ° C. It can be used as indoor air circulation heating, energy-saving heating and plant heating in industrial and mining enterprises and ordinary buildings. The utility model has the advantages of simple structure, small volume, light weight, low power consumption, convenient installation and use, reliable work, large noise, etc. The heater is mainly composed of axial flow fan.
The heater hot water heater is mainly composed of water heater and forced draft fan. The cooling air heater and fan output, and the indoor air temperature is adjusted. Finned tube of air heater. Heater such as aluminum plate wrapped in special equipment is from 2.5-3.2mm, exhaust pipe and hot medium flow pipe are welded together to form steam heat pipe, and fan type heater has an operating pressure of about 0.3MPa. The installation site of water heater is inflammable and explosive. When hot water or warm water cools through the fan heat pipe water, the heat is transferred to the inner wall and inner wall of the base pipe by convection, and then the heat is transmitted to the outer wall and heat sink through overheat conduction, and the surrounding heated or cooled air fins and outer walls are forced to convection and radiate. Generally speaking, the warm water heating device of blower is composed of hot water heater, low noise outer rotor axial-flow fan, radiator fin and fine steel shutter, etc., and the hot water temperature is 75 ℃ - 95 ℃.
The hot water heater adopts two kinds of heat sources: hot water and steam. The heat is released through the hot plate to heat the air. The fuselage is relatively heavy and the volume is large, so it needs uninterrupted hot water. The steam flows in. The installation environment requires high requirements. Since the electric energy is not used for heating, it has the characteristics of power saving and energy saving. Electric air curtain machine is widely used and easy to install. The place of hot water and steam source can also be of hydrothermal type. PTC thermistor has the characteristic of constant temperature heating. The principle is that after the thermistor is charged, the resistance value will enter the PTC self heating temperature in the jump zone. The surface temperature of thermistor heating PTC constant temperature will keep constant. This temperature is only related to the Curie temperature and applied voltage of PTC thermistor, but it is basically independent of ambient temperature. PTC heater is a heating device designed with constant temperature heating PTC thermistor. The water heater has the advantages of simple structure, convenient installation and low power consumption. Through the thermal performance test, the performance is stable and reliable. |
